Ultra-Slim M6 Series

Ultra-Slim
M6 Series

* Photos are Euro terminal M6D Series

Contributing to total cost reduction by saving space, energy, and wiring efforts

Multi-unit installation base and power module available
You can supply power at once if you use the power module and multi-unit installation base, making wiring work more efficiently.

M6 Series
Only 5.9 mm (0.23 in) wide ultra-slim design for M6D/M6S Series. High-density installation can be easily achieved using the ultra-slim card-type M6 Series with a thickness of 5.9 mm and the dedicated multi-channel installation base. Three series models are available for respective connection terminals.

Three series models are available for respective connection terminals.

Depending on the model.

M6S Series (Tension-Clamp)
Products Line up
Product Catalog

M6N Series (Screw terminal)
Products Line up
Product Catalog

M6D Series (Euro terminal)
Products Line up
Product Catalog

Ultra-slim structure

(click to enlarge image)
Isolation and power supply

Three-port isolation
Dielectric strength: 2000 V AC @ 1 min.

AC power supply: 100-240 V AC
DC power supply: 24 V DC
* Specifications may vary depending on the model. For details, see the datasheet.

Ultra-slim model operating with AC power supply

Thickness of the transformer has been drastically reduced by adopting reinforced insulation material, while the excellent dielectric strength is maintained.

Bears CE marking.

AC power supply	100-240 V AC at 47-66 Hz Allowable range: 90-264 V AC
Insulation resistance	Between input, output, and power supply 100MΩ min. at 500 V DC Dielectric strength
Dielectric strength	Between input, output, power supply, and ground 2000 V AC ＠ 1 min.

Ultra-slim model operating with AC power supply

List of models accepting AC power supply

Isolators: M6SYV, M6NYV, M6DYV
Signal transmitters with DC input (Analog type): M6SVS, M6NVS, M6DVS
PC-programmble universal transmitter: M6SXU, M6NXU, M6DXU
· DC input
· Thermocouple input
· RTD input
· Potentiometer input

Multi-channel installation base allowing high-density installation of up to 47 modules

The multi-channel installation base allows the power supply to go to all signal conditioners at once.

Power is supplied from the power modules, and up to 47 modules (using six multi-channel installation bases) can be connected.

Installation base

M6SBS, M6NBS, M6DBS
8 slots
8 slots (for extension)

Power Supply Module

DC power supply module
M6SPS1, M6NPS1, M6DPS1
Dual redundant DC power supply module
M6SPS2, M6NPS2, M6DPS2
AC power supply module
M6-PSM
Control panel miniaturization with reduction of panels in number

Even if 16 modules ^*1 are installed side by side, a maximum width of 9.5 cm (3.75 in.) is required, and the total power consumption is only 7.2 W ^*2.

*1. For M6D and M6S models.
*2. For the M6□YV isolator.
Marginal allowable load resistance of 550Ω sensor

The M6 Series’ powerful design allows current output with an allowable load of 550Ω (at 4-20 mA DC).

Despite being ultra-slim, the M6 Series can provide an output with ease if two receiving loads (250Ω each) are connected in series.
M6S Series tension-clamp ultra-slim signal conditioners (5.9 mm wide)

A terminal block of tension-clamp type that connects electric wires with powerful leaf springs.

An exceptionally reliable double-spring structure.

(click to enlarge image)
M6N Series screw terminal ultra-slim signal conditioners (7.5 mm wide)

An ultra-slim terminal block of screw-type saves space.

Incorporating self-up screws.

(click to enlarge image)
M6D Series euro terminal ultra-slim signal conditioners (5.9 mm wide)

Incorporating Euro terminals, which are common in Europe and the United States.

(click to enlarge image)