Low Profile M5-UNIT Series
M5 Series Transmitters are designed to accept a wide variety of process signal input and provide a standard and non-standard DC output.
- PC-programmable model is also available (M5X-UNIT Series)
- Power supply for AC (85-264V) is also available*1
- All types with isolated terminals
- Provided with zero span adjustment
- Supports special specifications
- Test Report Free of Charge!*2
- Loop test output (M5X-UNIT Series)
- New PC-programmable type Multi Power Transducer (Model: M5XWTU)
It incorporates a small, high-performance CPU to measure and compute various power quantities.
*1. CE marking is not available depending on the model.
*2. If you need a test report, please contact your local distributor. They will send it to you free of charge (pdf version only. Not available for all models).
Depending on the model.
-
Isolation and power supply
Three-port isolation
Dielectric strength: 2000 V AC @ 1 min. (with DC power supply)
Dielectric strength: 1500 V AC @ 1 min. (with AC power supply)AC power supply: 85-264 V AC
* Specifications may vary depending on the model. For details, see the datasheet.
DC power supply: 24 V DC -
The unit can be accommodated in a breaker box.
M5 series can be installed on thin panels where breakers and other low-profile devices are installed.
-
It is possible to install the unit even in a small gap on the side panel of a small device or a switch box.
-
You can select Modbus.*3
When placing an order for the PC-programmable model of the M5-UNIT Series, you can specify either a Modbus communications type or an analog output type.
*3. Contact us for the release date of the Modbus communication type.
Multi Power Transducer (Model: M5XWTU)
Easy to retrofit the Unit if there is a small distribution board clearance.
-
The M5-UNIT Series of Terminal Block Signal Conditioners has included a new PC-programmable type Multi Power Transducer (Model : M5XWTU).
Conventional models, generally known as power converters, have an image of being large and heavy. However, the M5XWTU is pocket-sized and can be held in one hand.
It incorporates a small, high-performance CPU to measure and compute various power quantities. In addition, the number of parts has been greatly reduced, resulting in a subminiature design.This is a small
Multi Power Transducer
model installed anywhere.Multi Power Transducer Model: M5XWTU
-
The Multi Power Transducer can be retrofitted.
You can install the Multi Power Transducer (Model: M5XWTU) in a small space, even on existing equipment.
-
You can start a single or multi-point power monitoring system with the Modbus.
You can start with a small budget and gradually increase the number of measurement points, extending to overall management. For example, using a Web Data Logger (Model: DL30) may be ideal as it enables Modbus communication at a reasonable cost.
-
You can choose one of the following output options.
Modbus communication, analog output, or power pulse/alarm output.
-
The Clamp-on Current Sensor can be retrofitted with no power line modification.
-
You can use versatile functions with a PC connected.
Setting items and convenient functions available when connected to a PC
The PC-programmable type Multi Power Transducer (Model: M5XWTU) makes it possible to freely set and change input specifications and measurement items using configurator software. Convenient functions, such as communication loop test output and the real-time displaying of various measured values on a PC monitor, are also available.
The M5-UNIT Series offers a variety of economical DC input signal transmitters.
-
PC-programmable models are also available.
You can set specifications using PCs.
In addition to I/O range calibration, you can configure various settings, including linearization, filter.
You can also output a simulated signal.· You can upload parameters to PCs and save files on them.
· You can also download parameters to other signal conditioners.
This function is useful when you want to make many settings for identical specifications or when you want to save the settings.
-
Loop test output
The loop test output function is used to output the desired signal even when no input signal is connected. This function eliminates the need for simulated input signals and simplifies the necessary loop test after wiring.
Besides the loop test output function, other useful functions are provided as standard.
· Trend graph display
· Compare function
· Arithmetic function
(linearizer, time-constant filter, and output limit operations) -
Economical DC input signal transmitter
Electronic circuit specially designed for the M5 Series
The M5VS circuit is an efficient electronic circuit designed to operate with the minimum number of parts without compromising performance and quality.
-
Signal transmitter suitable for minute signal input
Ceramic capacitors
The M5MV is a signal transmitter incorporating an electric circuit based on the electric circuit design of the M5VS so that the input section can handle minute signals. Also, as with the M5VS, the AC power supply does not use aluminum electrolytic capacitors.
-
Signal transmitter with ultra-fast 30μs response speed.
Toroidal transformer
A toroidal transformer with a donut-shaped core is an indispensable part of an efficient and high-speed response.
-
Signal transmitter with high dielectric strength that withstands 2000 V AC
Seat transformer
With the ultra-slim sheet transformer made from a printed circuit board, the M5VSH has achieved a dielectric strength of 2000 V AC without taking up much space.