Slice Type, Mixed Signal Remote I/O R80 Series

back

Slice Type, Mixed Signal Remote I/O R80 Series

Remote I/O for DCS and PLC

  • Remote I/O modules which interchange analog or digital I/O signals with the fieldbus
  • Space-saving
CE

Depending on the model.

Large No. of I/O Points Free Combinations Power Input 24 V DC
  • EtherCAT
  • CC-Link IE TSN
  • PROFI NET*1
  • EtherNet/IP*1
  • Modbus/TCP*1
  • Mounting Direction
    Mounting Direction
  • Mounting to Panel

    Leave enough space between the modules and the mounting panel.

    Mounting to Panel
  • Basic Configurations

    The number of I/O modules that can be mounted changes depending on the power/network module. Refer to the specifications of each power/network module for details.

    Althoug the module address can be arbitrarily set regardless of its mounting position, to avoid overlapped and unused addresses, set them consecutively starting at 0.

    Only for rightmost module, set termination resistor to enable. Protective cover is included in the package of power/network module.

    Basic Configurations
  • Current Consumption

    The I/O modules operate by the DC voltage (5 V DC) supplied from the power/network module. Arrange these modules in order that the total current consumed by these modules can be within the supply current capacity.

    If the current consumption exceeds the limit, change the combination of I/O modules or reduce the no. of modules mounted.

    Even if total consumption current of the I/O modules is less than the supply current capacity, the total install number of the modules is max. 16.

    Data Sheet [Current Consumption] (clink for more information)

Other Series