Paperless Recording System

73VR2100 - Paperless Recorder with built-in I/O

Built-in universal input modules.
Universal input DC, Thermocouple, RTD

  • Independent input type and range selectable for each channel
  • 100 msec. storing rate up to 6 point
  • 2, 4, 6, 8, 10 or 12 points
  • Real time trending and recording on the PC Recorder software MSR via Ethernet

Products Line up


Intuitive “Help View” screen for easy user setup and use.

DC Voltage Input resistance: 900kΩ minimum (Excluding the case in which, with range setting other than ±12V, ±6V or ±3V, a voltage exceeding ±1.3V is applied.)
Input range: ±60mV, ±125mV, ±250mV, ±500mV, ±1000mV, ±3V, ±6V, ±12V
DC Current 4-20mA, use optional REM3-250 resistor module
Thermocouple Input range: (PR), K (CA), E (CRC), F (IC), T (CC), B (RH), R, S, C (WRe 5-26), N, U, L, P (Platinel II)
Burnout sensing:
• Upscale: ≤130nA
• Downscale: ≤220nA
• No burnout: ≤10nA
RTD (3-wire) Input range: Pt 100 (JIS ’89), Pt 100 (JIS ’97, IEC), Pt 200, Pt 300, Pt 400, Pt 500, Pt 1000, Pt 50Ω (JIS ’• ;81), JPt 100 (JIS ’89), Ni 100, Ni 120, Ni 508.4Ω, Ni-Fe 604, Cu 10 @25°C
Burnout sensing:
• Upscale or Downscale: ≤130nA
Allowable leadwire resistance: 20Ω per wire
Number of input channels 2, 4, 6, 8, 10 or 12
Function pen points 12
Storing rate (high speed mode) 100 msec.
Storing rate (normal mode) 500 msec., 1, 2, 5, 10 seconds, 1minute, 10 minutes
Input types Universal input (DC mV and voltage, thermocouple, 3-wire RTD)
Trigger input Dry contact x 1
Alarm/Run output Relay contact x 1
Weight 2.4 kg (5.3 lbs)
Display Display device 5.5-inch TFT LCD
Display colors 256
Resolution 320 x 240 pixels
Ethernet 10BASE-T / 100BASE-TX automatically switched;
Conforms to IEEE802 (10BASE-T) or IEEE802.3 (100BASE-TX)
Degree of protection IP65
(applicable to the front panel of with the cover closed when a single unit is mounted according to the specified panel cutout)
Series Line up