M-System - Your I/O Superstore


	Mini-M Series Compact Signal Conditioners Mini-MW Series Signal Splitters

	PC Programmable 4-Wire, Two isolated outputs
	Wide selection of I/O ranges Fill-in-the-blank programming with PC based configurator (M2X) Two independent ranges can be specified with signal splitters. Single or dual (rotary encoder) input F to I, I to F and pulse isolator/scaler available. 2000 Vac isolation Base socket included with modules


	M5 / W5 Series Low Cost, Low Profile, Compact Modules


	Only 41 mm (1.6 in.) deep modules can be installed anywhere, even behind a panel cover. 2000 Vac isolation


	M3L / B3 Series Super-Slim Isolator

	PC Programming & "One-Step Cal" Universal I/O Output Loop Powered, DIP Switch Configurable
	Wide selection of I/O ranges Wide supply voltage range


	M6 Series Ultra-Slim Isolator


	Selectable connection method - Euro terminal, Screw terminal or Tension-Clamp. Output load resistance 550W (at 4-20 mAdc) The M6 Series is designed that ensuring low power consumption. The front Power LED provided 2000 Vac isolation


	YPD / WYPD Galvanically isolates pulse rates signals.


	Pulse device type and logic can be changed. Pulse width can be changed. Two pulse output types available


	M2XRP2 / JRP2 / JRQ2 / RPPD Rotary Encoder Input


	Isolates or converts two-phase pulse signals from a rotary encoder Various pulse types Excitation

M2XPA2	CE / UL / cUL
PC Programmable Frequency Input Open collector, mechanical contact, voltage pulse, two-wire current, RS-422 line driver selectable; 0-100 kHz max. Excitation 4 V, 8 V or 12 V selectable Output selectable within 0-20 mA and ±10 V. 100-240 Vac or 24 Vdc powered

M2SP	CE / UL / cUL
Fixed Range Frequency Input Dry contact or voltage pulse. Specific input range up to 10 kHz Excitation 12 V @30 mA 100-240 Vac or 24 Vdc powered UL/cUL Class I, Div. 2 approval

W2SP	CE / UL / cUL
Fixed Range Frequency Input Signal Splitter Dry contact or voltage pulse. Specific input range up to 10 kHz Excitation 12 V @30 mA Independent current/voltage output ranges can be specified. 100-240 Vac or 24 Vdc powered UL/cUL Class I, Div. 2 approval

M2AP	CE / UL / cUL
Fixed Range Frequency Output Specific input range up to 300 V Open collector, 5V pulse or mercury relay output. Specific output range up to 1 kHz 100-240 Vac or 24 Vdc powered UL/cUL Class I, Div. 2 approval

W2AP	CE / UL / cUL
Fixed Range Frequency Output Signal Splitter Specific input range up to 300 V Open collector, 5V pulse or mercury relay output. Specific output range up to 10 kHz 100-240 Vac or 24 Vdc powered. UL/cUL Class I, Div. 2 approval

M2PP	CE / UL
Pulse Isolator Mechanical contact, open collector or voltage pulse input; 0-10 kHz max. Open collector, voltage pulse or mercury relay output 100-240 Vac or 24 Vdc powered. UL Class I, Div. 2 approval
W2PP	CE
Pulse Isolator Signal Splitter Mechanical contact, open collector or voltage pulse input; 0-10 kHz max. Open collector, voltage pulse or Dry contact AC/DC switch output 100-240 Vac or 24 Vdc powered.

M2PRU	CE / UL / cUL
Pulse Scaler Open collector, mechanical contact, 5V pulse or two-wire current pulse input; 0-100 kHz max. Excitation 12 V/24 V @30mA Open collector, voltage pulse, AC/DC switch output Scaling factor adjustable of 1.000 x 1/1 to 0.0001 x 1/1000000 100-240 Vac or 24 Vdc powered UL/cUL Class I, Div. 2 approval

M5PA	CE
Fixed Range, Low Cost Open collector, mechanical contact, 5V/12V/24V pulse. Specific input range up to 100 kHz 100-240 Vac or 24 Vdc powered (CE for 24 Vdc type)
W5PA	CE
Fixed Range Signal Splitter, Low Cost Open collector, mechanical contact, 5V/12V/24V pulse. Specific input range up to 100 kHz Independent output ranges selectable 100-240 Vac or 24 Vdc powered (CE for 24 Vdc type)

M3LPA	CE / UL / cUL
PC & "One-Step Cal" Programmable Frequency Input Open collector, dry contact, voltage pulse, two-wire current, RS-422 line driver selectable; 0-100 kHz max. Excitation 4 V, 8 V or 12 V selectable Output selectable within 0-20 mA and ±10 V. 100-240 Vac or 24 Vdc powered (UL/cUL for 24 Vdc type) DIP switch or PC configuration 101-point linearization using the PC Configurator

M6SPA (Tension-Clamp Type)
M6NPA (Screw Terminal Type)
M6DPA (Euro Termina Type)
Fixed Range Frequency Input, Ultra-Slim Type Selectable connection method - Euro terminal, Screw terminal or Tension-Clamp. Open collector, mechanical contact, 5V/24V pulse. Specific input range up to 100 kHz 24 Vdc powered

B3FP	CE / UL / cUL
Output Loop Powered, DIP Switch Configurable Input Input type and frequency range selectable 12-45 Vdc powered

YPD
Pulse Isolator Dry contact, voltage pulse or two-wire current input; 0-100 kHz max. Excitation 5 V or 12 V Open collector, voltage pulse or relay contact output 100, 110, 115, 120, 200, 220, 240 Vac or 12, 24, 48 Vdc powered

WYPD
Pulse Signal Splitter Dry contact, voltage pulse or two-wire current input; 0-100 kHz max. Excitation 5 V or 12 V Open collector, voltage pulse or relay contact output (two) 100, 110, 115, 120, 200, 220, 240 Vac or 12, 24, 48 Vdc powered

M2XRP2	CE / UL / cUL
PC Programmable Rotary Encoder Speed Input Converts a two-phase forward and reverse rotation pulse signal with 90 degree phase difference into a forward and reverse speed signal Open collector, voltage pulse, RS-422 line driver selectable; 0-100 kHz max. Excitation 5 V or 12 V selectable Output selectable within 0-20 mA and ±10 V. 100-240 Vac or 24 Vdc powered

JRP2

Rotary Encoder Speed Input

Converts a two-phase forward and reverse rotation pulse signal with 90 degree phase difference into a forward and reverse speed signal
Open collector, voltage pulse or RS-422 line driver pulse inputs
Excitation 5 V, 12 V or 24 V
85-132 Vac or 12, 24, 48, 110 Vdc powered

Applications: Measuring moving speed of a machine with a rotary encoder

JRQ2

Rotary Encoder Position Input

Converts a two-phase forward and reverse rotation pulse signal with 90 degree phase difference into a forward and reverse position signal
Open collector, voltage pulse or RS-422 line driver pulse inputs
Excitation 5 V, 12 V or 24 V
85-132 Vac or 12, 24, 48, 110 Vdc powered

Applications: Measuring moving distance of a machine with a rotary encoder

RPPD

Rotary Encoder Pulse Isolator

Galvanically isolates two pulse rate signals from a rotary encoder
Dry contact, voltage pulse, two-wire current pulse, or RS-422 line driver pulse inputs
Relay, open collector or voltage pulse outputs
Excitation 5 V, 12 V or 24 V
85-132 Vac or 12, 24, 48, 110 Vdc powered

Applications: Isolating field pulse signals in order to reduce noise interference

Unique & Special
DC | Temperature | Pulse| Strain Gauge| Potentiometer | AC | Pneumatic| Function|Power Supply

Copyright (C)2003-2006 M-System Co., Ltd. All rights reserved.