M-System - Your I/O Superstore


	Mini-M Series Compact Signal Conditioners Mini-MW Series Signal Splitters

	PC Programmable 4-Wire, Two isolated outputs
	Wide selection of I/O ranges Fill-in-the-blank programming with PC based configurator (M2X) Two independent ranges can be specified with signal splitters. 2000 Vac isolation Base socket included with modules


	M5 / B5 / W5 Series Low Cost, Low Profile, Compact Modules

	4-wire & Two isolated outputs 2-wire
	Only 41 mm (1.6 in.) deep modules can be installed anywhere, even behind a panel cover. 2000 Vac isolation


	M3L / M3S / B3 Series Thin Profile Signal Conditioners

	PC Programming & "One-Step Cal" Universal I/O Super-Slim Isolator, Fixed Range & PC Programmable Type Output Loop Powered, DIP Switch Configurable
	Wide selection of I/O ranges Wide supply voltage range HART & PROFIBUS-PA type available (Output Loop Powered Type)


	M6 Series Ultra-Slim Signal Conditioners


	Selectable connection method - Euro terminal, Screw terminal or Tension-Clamp. Output load resistance 550 Ω (at 4-20 mAdc) Low power consumption Front Power LED provided The Installation Base holding eight modules supported by a common power supply 2000 Vac isolation


	27 Series Two-wire Temperature Transmitter

	PC Programmable Type
	Suitable for DIN B type head Optional LED indicator mountable on top of the transmitter


	B6U / B6U-B Two-wire Universal Temperature Transmitters


	Plug-in two-line LCD display HART programmable Intrinsically safe and explosion-proof

M2XU	CE / UL / cUL
PC Programmable Universal I/O DC mV, V & mA, T/C, RTD and Pot input. Output selectable within 0-20 mA and +/-10 V. 100-240 Vac or 24 Vdc powered 100-point linearization UL/cUL Class I, Div. 2 approval

M2XUM	CE
PC Programmable Universal I/O with Modbus RTU DC mV, V & mA, T/C, RTD and Pot input. Output selectable within 0-20 mA and +/-10 V. 100-240 Vac or 24 Vdc powered 100-point linearization

M2XM2	CE / UL / cUL
PC Programmable I/O Potentiometer 100-10k ohms Output selectable within 0-20 mA and +/-10 V. 100-240 Vac or 24 Vdc powered UL/cUL Class I, Div. 2 approval

M2MS	CE / UL / cUL
Fixed Range Potentiometer 100-10k ohms 100-240 Vac or 24 Vdc powered Fast response 25 msec. optional UL/cUL Class I, Div. 2 approval

W2MS	CE / UL / cUL
Fixed Range Signal Splitter Potentiometer 100-10k ohms Independent current/voltage output ranges can be specified. 100-240 Vac or 24 Vdc powered Fast response 25 msec. optional UL/cUL Class I, Div. 2 approval

M5MS	CE
Fixed Range, Low Cost Potentiometer 100-10k ohms 100-240 Vac or 24 Vdc powered (CE for 24 Vdc type) Fast response 25 msec. optional
W5MS	CE
Fixed Range Signal Splitter, Low Cost Potentiometer 100-10k ohms Independent output ranges selectable 100-240 Vac or 24 Vdc powered (CE for 24 Vdc type) Fast response 25 msec. optional

M3LU	CE / UL / cUL
PC Programming & "One-Step Cal" Universal I/O DC mV, V & mA, T/C, RTD, Pot and resistance input Output selectable within 0-20 mA and ±10 V 100-240 Vac or 24 Vdc powered (UL/cUL for 24 Vdc type) DIP switch or PC configuration 128-point linearization (DC input) using the PC Configurator (1000 points for T/C, 500 points for RTD)
M3LM	CE / UL / cUL
PC & "One-Step Cal" Programmable I/O Potentiometer 90-20k ohms Output selectable within 0-20 mA and ±10 V 10-32 Vdc powered DIP switch or PC configuration 125-point linearization using the PC Configurator

M3SXM	CE
PC Programmable, Super-Slim Type Potentiometer 100-5k ohms Output selectable within 0-20 mA and ±10 V. 24 Vdc powered
M3SMS	CE
Fixed Range, Super-Slim Type Potentiometer 100-10k ohms 100-240 Vac / 24 Vdc universal power input Fast response 25 msec. optional

M6SXM (Tension-Clamp Type)	CE
M6NXM (Screw Terminal Type)	CE
M6DXM (Euro Terminal Type)	CE
PC Programmable, Ultra-Slim Type Potentiometer 100-5k ohms Output selectable within 0-20 mA and +/-10 V. 24 Vdc powered

27PM	CE
Output Loop Powered, PC Programmable, Isolated Potentiometer 100-10k ohms 9-35 Vdc powered Function monitor LED optional Self diagnostics Low temperature drift

B6U	CE / ATEX / FM
Universal Temperature Input, HART Programmable, I/S DC mV, V & mA, T/C, RTD, Pot and resistance input. 12-42 Vdc powered (max. 28 V approved) ATEX Zone 0 approval FM Class I, Div. 1 & 2 approval

B6U-B	CE / ATEX / FM
Universal Temperature Input, HART Programmable, Explosion-proof DC mV, V & mA, T/C, RTD, Pot and resistance input. 12-42 Vdc powered (max. 28 V approved) NEMA 4X, IP65 enclosure ATEX Zone 0 approval FM Class I, II, III, Div. 1 & Class I, II, Div. 2 approval

B3HU	CE / ATEX / FM
Universal Temperature Input, HART Programmable mV, V, T/C, RTD, resistance and potentiometer input 12-42 Vdc powered (max. 28 V approved) ATEX Zone 0 approval
B3PU	CE
Universal Temperature Input, PROFIBUS-PA mV, V, T/C, RTD, resistance and potentiometer input 9-30 Vdc powered

B5MS	CE
Output Loop Powered, Fixed Range, Low Cost Potentiometer 100-10k ohms 12-28 Vdc powered Fast response 25 msec. optional

Unique & Special
DC | Temperature | Pulse| Strain Gauge| Potentiometer | AC | Pneumatic| Function|Power Supply

Copyright (C)2003-2006 M-System Co., Ltd. All rights reserved.