M-System - Your I/O Superstore

The widest variety of signal conditioning options available to the end-user. From two-wire hockeypucks to AC and DC powered DIN rail instruments, these devices isolate and interface field sensors such as AC/DC volts, 4-20 mA, RTDs, thermocouples, frequency, potentiometer, etc. to PLC, DCS or PC-based systems. Additionally, M-System offers the broadest line of signal splitters available.


	Mini-M Series Compact Signal Conditioners Mini-MW Series Signal Splitters

	PC Programmable 4-Wire, Two isolated outputs
	Wide selection of I/O ranges Fill-in-the-blank programming with PC based configurator (M2X) Two independent ranges can be specified with signal splitters. High-speed 180 microsec. type available 2000 Vac isolation Base socket included with modules


	M5 / B5 / W5 Series Low Cost, Low Profile, Compact Modules

	4-wire 2-wire Two isolated outputs
	Only 41 mm (1.6 in.) deep modules can be installed anywhere, even behind a panel cover. 2000 Vac isolation


	M3L / M3S / B3 Series Thin Profile Signal Conditioners

	PC Programming & "One-Step Cal" Universal I/O Super-Slim Isolator, Fixed Range & PC Programmable Type Output Loop Powered, DIP Switch Configurable
	Wide selection of I/O ranges Wide supply voltage range


	M6 Series Ultra-Slim Signal Conditioners


	Selectable connection method - Euro terminal, Screw terminal or Tension-Clamp. Output load resistance 550 Ω (at 4-20 mAdc) Low power consumption Front Power LED provided The Installation Base holding eight modules supported by a common power supply 2000 Vac isolation


	Input Loop Powered Isolators


	No external power source required One channel or two channels

M2XU	CE / UL / cUL
PC Programmable Universal I/O DC mV, V & mA, T/C, RTD and Pot input. Output selectable within 0-20 mA and ±10 V. 100-240 Vac or 24 Vdc powered 100-point linearization UL/cUL Class I, Div. 2 approval

M2XUM	CE
PC Programmable Universal I/O with Modbus RTU DC mV, V & mA, T/C, RTD and Pot input. Output selectable within 0-20 mA and ±10 V. RS-485/Modbus RTU, 38.4 kbps 100-240 Vac or 24 Vdc powered 100-point linearization

M2XV2	CE / UL / cUL
PC Programmable I/O Input selectable within 0-50 mA and ±10 V. Output selectable within 0-20 mA and ±10 V. 100-240 Vac or 24 Vdc powered UL/cUL Class I, Div. 2 approval

M2XF2	CE / UL / cUL
PC Programmable I/O, Linearized Output Input selectable within 0-50 mA and ±10 V. Output selectable within 0-20 mA and ±10 V. 100-240 Vac or 24 Vdc powered UL/cUL Class I, Div. 2 approval

M2VS	CE / UL / cUL
Fixed Range Specific input range within ±300 V; current input with a resistor. 100-240 Vac or 24 Vdc powered Fast response 25 msec. optional UL/cUL Class I, Div. 2 approval

M2FV	CE
36 I/O Combinations by DIP Switch Setting Free I/O range combinations among 4-20 mA, 0-20 mA, 0-10 V, 2-10 V, 0-5 V and 1-5 V Response time is also selectable with DIP switch between 0.5 sec. and 30 msec. 100-240 Vac or 24 Vdc powered Ideal for quick-relief spare parts

W2VS	CE / UL / cUL
Fixed Range Signal Splitter Specific input range within ±300 V; current input with a resistor. Independent current/voltage output ranges can be specified. 100-240 Vac or 24 Vdc powered Fast response 25 msec. optional UL/cUL Class I, Div. 2 approval

M2VF	CE / UL / cUL
Fixed Range, Fast Response <180 microsec Specific input range within ±300 V; current input with a resistor. 100-240 Vac or 24 Vdc powered Response time <180 microsec. UL/cUL Class I, Div. 2 approval

M2VF2	CE / UL / cUL
Fixed Range, Fast Response <30 microsec. Specific input range within ±300 V; current input with a resistor. 100-240 Vac or 24 Vdc powered Response time <30 microsec. (15 kHz, -3 dB) UL/cUL Class I, Div. 2 approval
W2VF	CE / UL / cUL
Fixed Range Signal Splitter, Fast Response Specific input range within ±300 V; current input with a resistor. Independent current/voltage output ranges can be specified. 100-240 Vac or 24 Vdc powered. Response time <180 microsec. UL/cUL Class I, Div. 2 approval

M5VS	CE
Fixed Range, Low Cost Specific input range within ±300 V; current input with a resistor. 100-240 Vac or 24 Vdc powered (CE for 24 Vdc type) Fast response 25 msec. / <1 msec. optional
M5MV	CE
Fixed Range, Low Cost, Narrow Span Input Specific input range within ±100 mV; current input with a resistor. 100-240 Vac or 24 Vdc powered (CE for 24 Vdc type) Fast response 25 msec. optional
M5VF	CE
Fixed Range, Low Cost, High Speed Response Specific input range within ±30 V; current input with a resistor. 100-240 Vac or 24 Vdc powered (CE for 24 Vdc type) Fast response <150 microsec.
W5VS	CE
Fixed Range Signal Splitter, Low Cost Specific input range within ±300 V; current input with a resistor. Independent output ranges selectable 100-240 Vac or 24 Vdc powered (CE for 24 Vdc type) Fast response 25 msec. optional
W5FV	CE
DIP Switch Configurable Signal Splitter, Low Cost Input range field-selectable among 11 options Output range field-selectable among 7 options Optional second output of independent range can be specified when ordering 100-240 Vac or 24 Vdc powered (CE for 24 Vdc type)

M3LU	CE / UL / cUL
PC Programming & "One-Step Cal" Universal I/O DC mV, V & mA, T/C, RTD, Pot and resistance input Output selectable within 0-20 mA and ±10 V 100-240 Vac or 24 Vdc powered (UL/cUL for 24 Vdc type) DIP switch or PC configuration 128-point linearization (DC input) using the PC Configurator (1000 points for T/C, 500 points for RTD)

M3LV	CE / UL / cUL
PC & "One-Step Cal" Programmable I/O Input selectable within 0-20 mA and ±10 V. Output selectable within 0-20 mA and ±10 V. 10-32 Vdc powered DIP switch or PC configuration 101-point linearization using the PC Configurator

M3SXV	CE
PC Programmable I/O, Super-Slim Type Input selectable within 0-50 mA and ±10 V. Output selectable within 0-20 mA and ±10 V. 100-240 Vac / 24 Vdc universal power input
M3SVS	CE
Fixed Range Isolator, Super-Slim Type Specific input within ±300 V; current input with an internal resistor 100-240 Vac / 24 Vdc universal power input Fast response 25 msec. optional
M3SWVS	CE
Fixed Range Signal Splitter, Super-Slim Type Specific input within ±30 V; current input with an internal resistor 100-240 Vac / 24 Vdc universal power input Fast response 3.5 msec. optional

M3SYV	CE
Fixed Range Isolator, Super-Slim Type, Low Cost Input 4-20 mA, 0-20 mA, ±20 mA, 0-10 V, 0-5 V, 1-5 V, ±10 V, ±5 V Output 4-20 mA, 0-20 mA, 0-10 V, 1-5 V, ±10 V 24 Vdc powered

M6SXV (Tension-Clamp Type)	CE
M6NXV (Screw Terminal Type)	CE
M6DXV (Euro Terminal Type)	CE
PC Programmable I/O, Ultra-Slim Type Input selectable within 0-50 mA and ±10 V. Output selectable within 0-20 mA and ±10 V. 24 Vdc powered
M6SVS (Tension-Clamp Type)	CE
M6NVS (Screw Terminal Type)	CE
M6DVS (Euro Terminal Type)	CE
Fixed Range, Ultra-Slim Type Specific input within ±30 V; current input with an internal resistor. 24 Vdc powered Fast response 3.5 msec. optional with voltage output or 25 msec. optional with current output.

M6SWVS (Tension-Clamp Type)	CE
M6NWVS (Screw Terminal Type)	CE
M6DWVS (Euro Terminal Type)	CE
Fixed Range Signal Splitter, Ultra-Slim Type Specific input within ±30 V; current input with an internal resistor. Independent current/voltage output ranges can be specified. 24 Vdc powered Fast response 3.5 msec. optional with voltage output.
M6SYV (Tension-Clamp Type)	CE
M6NYV (Screw Terminal Type)	CE
M6DYV (Euro Terminal Type)	CE
Fixed Range Isolator, Ultra-Slim Type Input/Output: 4-20 mA/4-20 mA, 4-20 mA/1-5 V, 1-5 V/4-20 mA, 1-5 V/1-5 V, ±10 V 24 Vdc powered Fast response 3.5 msec. optional with voltage output or 25 msec. optional with current output.

M2SN-1, M2SN-2	CE / UL
Input Loop Powered Isolator, Single Channel (M2SN-1) Input Loop Powered Isolator, Dual Channel (M2SN-2) Input 4-20 mA or 10-50 mA Output 4-20 mA or 1-5 V UL Class I, Div. 2 approval
B5SN	CE
Input Loop Powered Isolator, Low cost Input 4-20 mA Output 4-20 mA
M6SSN (Tension-Clamp Type)	CE
M6NSN (Screw Terminal Type)	CE
M6DSN (Euro Terminal Type)	CE
Input Loop Powered Isolator, Ultra-Slim Type, Single Channel (M6xSN-1) Input Loop Powered Isolator, Ultra-Slim Type, Dual Channel (M6xSN-2) Input 0-20 mA (4-20 mA) Output 0-20 mA (4-20 mA)

B3FV	CE / UL / cUL
Output Loop Powered, DIP Switch Configurable Input Input selectable within ±30 mA and ±100 V. 12-45 Vdc powered
B3VS/1, B3VS/2	CE / UL / cUL
Output Loop Powered, Fixed Range, Single Channel (B3VS/1) Output Loop Powered, Fixed Range, Dual Channel (B3VS/2) Specific input within ±30 mA and ±100 V. 12-45 Vdc powered

B5VS	CE
Output Loop Powered, Fixed Range, Low Cost Specific input range within ±30 V 12-28 Vdc powered Fast response 25 msec. optional

Unique & Special
DC | Temperature | Pulse| Strain Gauge| Potentiometer | AC | Pneumatic| Function|Power Supply

Copyright (C)2003-2006 M-System Co., Ltd. All rights reserved.