M-System - Your I/O Superstore


	M3LU PC Programmable 128-point Linearizer


	Enhanced PC Configurator enables trend monitoring 18 mm (.71 in.) thin profile DIN rail moutning Manual on-site calibration 1500 Vac isolation


	M2XF2 PC Programmable 100-point Linearizer


	Fill-in-the-blank programming with Windows PC based configurator Manual on-site calibration 2000 Vac isolation Base socket included with modules


	M6 Series PC Programmable Function Modules


	Selectable connection method - Euro terminal, Screw terminal or Tension-Clamp. Output load resistance 550 Ω (at 4-20 mAdc) Low power consumption Front Power LED provided The Installation Base holding eight modules supported by a common power supply 2000 Vac isolation


	Mini-M Series Analog Function Modules


	Two-input arithmetic functions, ratio/bias, square root extraction, high/low limit, inverted output, delay/ramp buffers, track/hold, peak/valley hold, high/low selector

M3LU	CE / UL / cUL
PC Programmable Universal I/O 128-point Linearizer DC mV, V & mA, T/C, RTD, Pot and resistance input. Output selectable within 0-20 mA and ±10 V. 100-240 Vac or 24 Vdc powered DIP switch or PC configuration

M2XF2	CE / UL / cUL
PC Programmable 100-point Linearizer Input selectable within 0-50 mA and +/-10 V. Output selectable within 0-20 mA and +/-10 V. 100-240 Vac or 24 Vdc powered UL/cUL Class I, Div. 2 approval

M6SXF1 (Tension-Clamp Type)	CE
M6NXF1 (Screw Terminal Type)	CE
M6DXF1 (Euro Terminal Type)	CE
PC Programmable I/O, Ultra-Slim Type, Single-input Functions – Filter / Lag, Linearization, Limiter Input selectable within 0-50 mA and ±10 V. Output selectable within 0-20 mA and ±10 V. 24 Vdc powered
M6SXF2 (Tension-Clamp Type)	CE
M6NXF2 (Screw Terminal Type)	CE
M6DXF2 (Euro Terminal Type)	CE
PC Programmable I/O, Ultra-Slim Type, Two-input Functions – Math functions, Hi/Low signal selector Input selectable within 0-50 mA and ±10 V. Output selectable within 0-20 mA and ±10 V. 24 Vdc powered

M6SXF3 (Tension-Clamp Type)	CE
M6NXF3 (Screw Terminal Type)	CE
M6DXF3 (Euro Terminal Type)	CE
PC Programmable I/O, Ultra-Slim Type Track/Hold or Pesk hold function's selection available Input selectable within 0-50 mA and ±10 V. Output selectable within 0-20 mA and ±10 V. 24 Vdc powered

M2ADS	CE / UL / cUL
Two-input Adder Y = K1X1 + K2X2 Specific input range within +/-300 V 100-240 Vac or 24 Vdc powered UL/cUL Class I, Div. 2 approval

M2SBS	CE / UL / cUL
Two-input Subtractor Y = K1X1 - K2X2 Specific input range within +/-300 V 100-240 Vac or 24 Vdc powered UL/cUL Class I, Div. 2 approval

M2MLS	CE / UL / cUL
Two-input Multiplier Y = K1X1 x K2X2 Specific input range within +/-300 V 100-240 Vac or 24 Vdc powered UL/cUL Class I, Div. 2 approval

M2DIS	CE / UL / cUL
Two-input Divider Y = K1X1 / K2X2 Specific input range within +/-300 V 100-240 Vac or 24 Vdc powered UL/cUL Class I, Div. 2 approval

M2REB	CE / UL / cUL
Ratio / Bias Function, Output Bias Y = KX + B (positive), Y = KX + B + 100% (negative) Specific input range within +/-30 V; current input with a resistor. 100-240 Vac or 24 Vdc powered Easy & simple settig with the front digital meter UL/cUL Class I, Div. 2 approval

M2RTS	CE / UL / cUL
Ratio / Bias Function, Input Bias Y = K(X + B) (positive), Y = K(X + B) + 100% (negative) Specific input range within +/-30 V; current input with a resistor. 100-240 Vac or 24 Vdc powered Easy & simple settig with the front digital meter UL/cUL Class I, Div. 2 approval

M2FL / M2FLS	CE / UL / cUL
Square Root Extractor Specific input range within +/-300 V; current input with a resistor. 100-240 Vac or 24 Vdc powered UL/cUL Class I, Div. 2 approval

M2LMS	CE / UL / cUL
High / Low Limiter Specific input range within +/-30 V; current input with a resistor. 100-240 Vac or 24 Vdc powered High & Low limits independently adjustable within -10.0 to +105% Easy & simple settig with the front digital meter UL/cUL Class I, Div. 2 approval

M2UDS2	CE
Inverted Output, Simple Loop Test Output Specific input range within +/-300 V; current input with a resistor. 100-240 Vac or 24 Vdc powered
M2UDS	CE / UL / cUL
Inverted Output Specific input range within +/-300 V; current input with a resistor. 100-240 Vac or 24 Vdc powered UL/cUL Class I, Div. 2 approval

M2CDS	CE / UL / cUL
Delay Buffer (first order lag output) Specific input range within +/-300 V; current input with a resistor. 100-240 Vac or 24 Vdc powered Time constant adjustable within 0.5-20 sec. UL/cUL Class I, Div. 2 approval

M2CRS	CE / UL / cUL
Ramp Buffer (constant response) Specific input range within +/-300 V; current input with a resistor. 100-240 Vac or 24 Vdc powered Rate-of-change adjustable within 0.5-40 sec. UL/cUL Class I, Div. 2 approval

M2AMS2	CE
Track or Hold, Simple Loop Test Output Specific input range within +/-300 V; current input with a resistor. 100-240 Vac or 24 Vdc powered Holds the output once the command is received until reset
M2AMS	CE / UL / cUL
Track or Hold Specific input range within +/-300 V; current input with a resistor. 100-240 Vac or 24 Vdc powered Holds the output once the command is received until reset UL/cUL Class I, Div. 2 approval

M2PHS2	CE
Peak/Valley Hold, Simple Loop Test Output Specific input range within +/-300 V; current input with a resistor. 100-240 Vac or 24 Vdc powered Responds only to increasing/decreasing signals
M2PHS	CE / UL / cUL
Peak/Valley Hold Specific input range within +/-300 V; current input with a resistor. 100-240 Vac or 24 Vdc powered Responds only to increasing/decreasing signals UL/cUL Class I, Div. 2 approval

M2SES2	CE
High or Low Signal Selector, Simple Loop Test Output 1-5 V, 4-20 mA, 2-10 mA, 1-5 mA, 10-50 mA input 100-240 Vac or 24 Vdc powered Selects either higher or lower of two input signals
M2SES	CE / UL / cUL
High or Low Signal Selector 1-5 V, 4-20 mA, 2-10 mA, 1-5 mA, 10-50 mA input 100-240 Vac or 24 Vdc powered Selects either higher or lower of two input signals UL/cUL Class I, Div. 2 approval

Unique & Special
DC | Temperature | Pulse| Strain Gauge| Potentiometer | AC | Pneumatic| Function|Power Supply

Copyright (C)2003 M-System Co., Ltd. All rights reserved.