Services & Support > Software Download & Upgrade > R3CON
R3CON: R3 Configurator Software

R3CON Configurator Software is used to monitor and set parameters for R3 series network modules and I/O modules.

Press DOWNLOAD button for the ZIP archive file (R3CON_V25901.zip) and save the archive on any folder you like.

Use an uncompressing tool to expand the downloaded archive.

For installing and using the R3CON Software, please refer to the R3CON Users Manual.PDF
< CAUTION >
If you already have the R3CON program of an older version installed in your PC, remove it before installing the downloaded one. Refer to the R3CON Users Manual for the procedure.
< NOTE >
When programming a R3 module using the R3CON, PC Configurator Cable is required to connect the module to a PC.
The network interface module is other than R3-NCIE1 and R3-NECT1 … MODEL : MCN-CON or COP-US
The network interface module is R3-NCIE1 or R3-NECT1 … Use a commercially available USB cable (Type A Mini B).
Model No. R3CON
Version
2.59.01 Applicable R3 Modules
OS Windows 7 (32bit/64bit) , Windows 10 (32bit/64bit)
System Serial port (COM 1 through COM 16) 
RAM must satisfy the operating system’s requirements.
Minimum 15 MB free hard disk space
Release Date December 07, 2023
File ID ZIP Archive: R3CON_V25901.zip
File Size 5.9 MB
 
CANCEL
ZIP Archive
DOWNLOAD NOW