Download > Software Download & Upgrade > M6CFG
M6CFG: M6 Configurator Software
M6CFG Configurator Software is used to monitor and set parameters for M6 Series Programmable Transmitters.


Self-expanding (M6CFG_R6.exe) and ZIP (M6CFG_R6.zip) archives are selectable for your convenience.

Self-expanding Archive: Locate the downloaded archive using Explorer on the Windows desktop, and double-click it to automatically start uncompressing process. Unzipped file folder will be created where the downloaded archive is located.
ZIP Archive: Use an uncompressing tool to expand the downloaded archive.

For installing and using the M6CFG Software, please refer to the M6CFG Users Manual. 1 MB

< NOTE >
When programming a M6 module using the M6CFG, PC Configurator Cable (model: MCN-CON or COP-US*) is required to connect the module to a PC.
*The COP-US is usable with Windows 2000 or later-version OS.

Model No. M6CFG
Version
6  
Applicable M6 Modules M6xXU, M6xXV, M6xXT, M6xXR, M6xXM, M6xXAS, M6xXAR, M6xXAT, M6xXF1, M6xXF2, M6xXF3
OS Windows Vista(32bit), Windows XP, Windows 2000,
Windows Me, Windows 98SE
Note: Microsoft Internet Exploror 5 or higher versions must be installed in the system.
System Serial port (COM1 through COM16) or USB Port
RAM must satisfy the operating system’s requirements.
Minimum free hard disk area 10 MB
Release Date April 8, 2010
File ID Self-expanding Archive: M6CFG_R6.exe
ZIP Archive: M6CFG_R6.zip
File Size 3.96 MB

CANCEL
Self-expanding Archive
DOWNLOAD NOW
ZIP Archive
DOWNLOAD NOW

Copyright (C) 2007-2010 M-System Co., Ltd. All rights reserved.