This update corrects the following problem(s):
- When connected to the R3 Series Network Module model R3-NM1, alarm outputs may not be provided at Discrete Output Modules (model: R3-DCx) .
|
Applicable Software Versions |
This update is applicable to the following versions of 73ET.
Applicable version |
Updated version |
V6.00A through V6.00U |
V6.00V |
< How to confirm the software version of 73ET? >
Start up the 73ET. The version No. is indicated on the right top in the initial
view. |
Updating the software will fix the bug. This update will not
affect existing configuration setting or data stored in the 73ET.
< CAUTION ! >
DO NOT apply this update to versions other than indicated above. It may cause
malfunctions if it is applied to an wrong version program. |
How to Install the Update |
Get CF Card ready before updating. You can use a card used to
store the 73ET data for this operation without affecting or losing files or data
in the card. However, as a precaution, we recommend that you would store backup
files (7xET.7xDA, 7xET.7xPA, 7xET.7xAA, 7xET.7xCA) in the PC's hard disk.
ZIP archive
1. |
Press DOWNLOAD button for the ZIP archive
and save the archive on your Windows desktop. |
2. |
Use an uncompressing tool to expand the downloaded archive.
Unzipped files are: 73ET.exe, 73ETINST.exe. |
3. |
Turn off the power supply to the 73ET recorder/viewer unit ('Recorder'). If
the Recorder is running, be sure to touch STOP key on the screen and cancel recording
before turning off the power supply. |
4. |
Push the CF Card Eject button and remove the card. |
5. |
Copy the files (7xET.7xDA, 7xET.7xPA,
7xET.7xAA, 7xET.7xCA) in the card to the PC's hard disk if you want to
store backup files. |
6. |
Copy 73ET.exe and 73ETINST.exe to the card. |
7. |
Insert the card to the card slot of the Recorder. |
8. |
Turn on the power supply to the Recorder. |
9. |
"Copying 73ET.exe! Please wait!!" message
appears on the screen. Wait until another message "Eject VersionUp CF. Please
restart!!" appears. Turn off the power supply and eject the card. |
10. |
Delete 73ET.exe and 73ETINST.exe from the card, and
return the files you stored separately in (5) back to the card. |
11. |
Insert the card to the card slot of the Recorder and
turn on the power supply. |
|
|
Model No. |
73ET-M2-x/0003 |
Version |
6.00V |
Release Date |
Feb. 14, 2008 |
File ID |
ZIP Archive: 73ET_V600Ve.zip |
File Size |
188 KB |
|
|
ZIP Archive
|
|
|
Click Here for the update history of this software. |