47DCFG Configurator Software is used to monitor
and set parameters for 47D Series Digital Panel Meters.
Self-expanding (47DCFG_R4.exe) and ZIP (47DCFG_R4.zip) archives are selectable
for your convenience.
| Self-expanding Archive: |
Locate the downloaded archive using Explorer on the Windows desktop,
and double-click it to automatically start decompressing process. Unzipped file
folder will be created where the downloaded archive is located. |
| ZIP Archive: |
Use a decompressing tool to expand the downloaded archive. |
For installing and using the 47DCFG Software, please refer to the 47DCFG
Users Manual. 1,1
M |
< NOTE >
When programming the 47D Series using the 47DCFG, one of the following
is required to connect the module to a PC:
| Connection |
Required Device |
RS-485
(Modbus) |
RS-232C/RS-485 Converter, model: R2K-1 or LK-1
|
Ethernet
(Modbus) |
Ethernet Communication Adaptor, model: 72EM2-M4
|
| Infrared |
Infrared Communication Adaptor, model: COP-IRU
|
|
| Model No. |
47DCFG |
| Version |
|
| Applicable 47D Modules |
47DV, 47DT, 47DR, 47DM |
| OS |
Windows 2000, Windows XP, Windows Vista (32 bits)
Note: Microsoft Internet Exploror 5 or higher versions must be installed
in the system. |
| System |
Serial port (COM1 through COM16) or LAN Port
RAM must satisfy the operating system’s requirements.
Minimum free hard disk area 10 MB |
| Release Date |
January 28, 2010 |
| File ID |
Self-expanding Archive: 47DCFG_R4.exe
ZIP Archive: 47DCFG_R4.zip |
| File Size |
3.9MB |
|
